Chimney planner introduction


I know it, I keep planning!


First of all let's go through what type of chimney system can we plan according to the geometry and the type of the pipe.
The next examples are helping you to find the suitable chimney system. 

Choose the concentric (pipe in pipe) system D60/100 if there isn't any bend and the chimney is relatively short.
Choose the concentric (pipe in pipe) system D80/125 if there are bends and/or the lenght chimney is big.
Choose the concentric (pipe in pipe) system D80/125 in case of lining the actual dustfree chimney. 
Choose the single wall(D80 or D100) divided system in this cases: if the chimney isn't dustfree, if there are bends or the chimney for lining has bigger diameter.
Choose the insulated system for outdoor instalation. 

Afer knowing the usage of different chimney system let's see our chimney planner. 

1.
Creating the profile
- Possibility to have an access for chimney calculator
- Activating the profile
2.
Log in
3.
Drawing area
4.
Boilers
To start the planing pull the suitable boiler to the drawing area with the mouse.


1.
Products, groups
To continue the drawing pull any of the products marked with green pencil to the drawing area.
2.
Toolbar
3.
Saved drawings
4.
Antecedent


1.
Basket
(It includes the elements which are necessary for the drawing.)
2.
Element which can be rotated in 360 degree
3.
Deleting the last element of the actual section
4.
By clicking on the end of pipe choose the drawing section.


1.
Choosing the boiler according to the diameter of the pipe
2.
Choose suitable starter or divider part if it is neccesary. 
3.
If we are lining a chimney we can start with an elbow with support.  
4.
For finishing the smoke section we use the chimney cover. 
5.
To finish the air section we use the air inletgrid.


1.
You can pull the special products (can not be drawn) to the basket or ypu can click on the basket adding it to your list. 
2.
ÁIf we are making a quotation we can add our working fee.
3.
If we are ready with the drawing and the quotation we can print our work by clicking on the suitable button. 
During our work we can move the drawing by pushing and moving the mouse's left button.
We can zoom in and out by pushing the 'Alt' button and at the same time rolling the middle button of the mouse. Pushing the 'Alt' button and the left button of the mouse we can rotate the drawing in 3D. 


The video of the chimney planner

If we are ready with the chimney we can see how to use the chimney calculating program. 

1.
Login
2.
Drawing the chimney or load any of the saved drawing
3.
Clicing on the calculation button
If this button is unavailable please wait for our feedback.


1.
Chimney parameter 
For residential usage it should be in vet mode. 
2.
Enviromental adjustment
3.
Variety of the calculation
The program offers the most basic datas. In case of any discrepancy we can modify the settings. 


1.
Boiler
Choose the boiler according to its type and producer.
We modify the parameter of the boiler only in case of any mistake in the offered datas. 
2.
We can adjust the outdoor temperature of the different chimney sector according to location. 
3.
We can cut or divide the length of the pipe. 


1.
Start the calculation
The cover page, the drawing and the result of the calculation will open in a new window of the browser. 
If we want to modify the starting parameter we can close the result page and go back the calculation page.


1.
Fill up the necessary parts
2.
To start the printing you can click on the sign or you can choose 'Print' from the browser. 


The video of our chimney calculation program

english flag hungarian flag

This page is under development.

This page will show the saved favourites, orders, chimney-plans and worksheets.

The webshop profile can be shown by following this link.

This page is under development.

Later you will be able to view and order products on this page.

Now the basket is available here.

The site uses cookies. Further information